PARIM 73401 Black

1.56 MID-INDEX LENSES
Fragmentation: When plastic lens breaks, it breaks into larger fragments than their glass counterparts. Furthermore, the fragmented pieces are not as sharp as glass.
Fogging: Mid Index lenses are less likely to fog-up than glass lenses because it responds more favorably to temperature changes.
Weight: Glass lenses are approximately 2X heavier than plastic lenses of similar size and shape. The lighter weight provides the wearer greater comfort.
Reflections: Mid Index lenses have much lower internal reflection and surface glare than glass materials.
Tinting: Mid index lenses are also tintable, so you can get that pair of sunglasses you have been eyeing for so long.
FDA Ball Drop Test Parameters:
1. The impact test will consist of a 5/8 inch steel ball weighing approximately 0.56 ounces
2. The ball should be dropped from a height of 50 inches from the horizontal upper surface of the lens
3. The geometric center of the lens should be struck by the ball within a 5/8 inch diameter circle
4. There cannot be anything restricting the fall of the ball
5. A tube may be used to guide the ball to the lens; the ball may be dropped through a tube extending to within approximately 4 inches of the lens.

1.59 PC LENSES
Impact Resistant: Polycarbonate material was originally made for uses on canopies covering fighter planes and then made its way into space on astronaut visors and space shuttle windshields. Today it is readily available to the public. It impact resistance makes the material extremely suitable for sports, industrial safety goggles, and children eyewear.
Scratching: The reason for polycarbonate lenses impact resistance is because of its softness. Softer materials will flex instead of fragment when met with great force. However, the property allows lenses to be scratched easily. Therefore, every single one of our polycarbonate lenses is multi-coated with hard coating that forms a protective layer around the lenses allowing the lenses to be free from scratches while retaining its impact resistant qualities.
UV Protection: Polycarbonate lenses inherently carries UV protection properties that blocks nearly 100% of the UV rays from entering the back of the retina.
StabilityThe impact resistance of Polycarbonate monomer gives plastic lenses the strength to sustain stable curve design.
FDA Ball Drop Test Parameters:
1. The impact test will consist of a 5/8 inch steel ball weighing approximately 0.56 ounces
2. The ball should be dropped from a height of 50 inches from the horizontal upper surface of the lens
3. The geometric center of the lens should be struck by the ball within a 5/8 inch diameter circle
4. There cannot be anything restricting the fall of the ball
5. A tube may be used to guide the ball to the lens; the ball may be dropped through a tube extending to within approximately 4 inches of the lens.

1.61 HIGH-INDEX LENSES
Fragmentation: When plastic lens breaks, it breaks into larger fragments than their glass counterparts. Furthermore, the fragmented pieces are not as sharp as glass.
Fogging: High Index lenses are less likely to fog-up than glass lenses because it responds more favorably to temperature changes.
Weight: Glass lenses are approximately 2X heavier than plastic lenses of similar size and shape. The lighter weight provides the wearer greater comfort.
Reflections: High Index lenses have much lower internal reflection and surface glare than glass materials.
Tinting: High index lenses are also tintable, so you can get that pair of sunglasses you have been eyeing for so long.
FDA Ball Drop Test Parameters:
1. The impact test will consist of a 5/8 inch steel ball weighing approximately 0.56 ounces
2. The ball should be dropped from a height of 50 inches from the horizontal upper surface of the lens
3. The geometric center of the lens should be struck by the ball within a 5/8 inch diameter circle
4. There cannot be anything restricting the fall of the ball
5. A tube may be used to guide the ball to the lens; the ball may be dropped through a tube extending to within approximately 4 inches of the lens.

1.67 HIGH-INDEX LENSES
Fragmentation: When plastic lens breaks, it breaks into larger fragments than their glass counterparts. Furthermore, the fragmented pieces are not as sharp as glass.
Fogging: High Index lenses are less likely to fog-up than glass lenses because it responds more favorably to temperature changes.
Weight: Glass lenses are approximately 2X heavier than plastic lenses of similar size and shape. The lighter weight provides the wearer greater comfort.
Reflections: High Index lenses have much lower internal reflection and surface glare than glass materials.
Tinting: High index lenses are also tintable, so you can get that pair of sunglasses you have been eyeing for so long.
FDA Ball Drop Test Parameters:
1. The impact test will consist of a 5/8 inch steel ball weighing approximately 0.56 ounces
2. The ball should be dropped from a height of 50 inches from the horizontal upper surface of the lens
3. The geometric center of the lens should be struck by the ball within a 5/8 inch diameter circle
4. There cannot be anything restricting the fall of the ball
5. A tube may be used to guide the ball to the lens; the ball may be dropped through a tube extending to within approximately 4 inches of the lens.

1.74 HIGH-INDEX LENSES
Fragmentation: When plastic lens breaks, it breaks into larger fragments than their glass counterparts. Furthermore, the fragmented pieces are not as sharp as glass.
Fogging: High Index lenses are less likely to fog-up than glass lenses because it responds more favorably to temperature changes.
Weight: Glass lenses are approximately 2X heavier than plastic lenses of similar size and shape. The lighter weight provides the wearer greater comfort.
Reflections: High Index lenses have much lower internal reflection and surface glare than glass materials.
Tinting: High index lenses are also tintable, so you can get that pair of sunglasses you have been eyeing for so long.
FDA Ball Drop Test Parameters:
1. The impact test will consist of a 5/8 inch steel ball weighing approximately 0.56 ounces
2. The ball should be dropped from a height of 50 inches from the horizontal upper surface of the lens
3. The geometric center of the lens should be struck by the ball within a 5/8 inch diameter circle
4. There cannot be anything restricting the fall of the ball
5. A tube may be used to guide the ball to the lens; the ball may be dropped through a tube extending to within approximately 4 inches of the lens.